|
MADS Electronics Smarty Catcher Disclaimer
THIS IS A HIGH
PERFORMANCE PRODUCT
USE AT YOUR OWN RISK
This product is intended for OFF ROAD
USE ONLY. This product is not intended to be
used to break the law. Do not use this product until you have
read the following agreement. This agreement sets forth the terms
and conditions for the use of this product. The installation of this product
indicates that the buyer has read and understands this
agreement and accepts the terms and conditions.
DISCLAIMER OF LIABILITY
MADS Electronics, it’s distributors,
jobbers and dealers (hereafter Seller) shall be in no
way responsible for the product’s proper uses and
service.
THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS
The buyer acknowledges that he is not
relying on the Sellers skill or judgment to select of
furnish goods suitable for any particular purpose and
that there are no liabilities which extend beyond the
description on the face hereof, and the buyer hereby
waivers all remedies or liabilities expressed or
implied, arising by law or otherwise ( including without
any obligation of the seller with respect fitness,
merchantability and consequential damages ) whatever or
not occasioned by the sellers negligence.
The Seller disclaims any warranty and
expressly disclaims any liability for personal injury
and damages. The buyer acknowledges and agrees that the
disclaimer of any liability for personal injury is a
material term for this agreement and the buyer agrees to
indemnify the Seller and to hold the Seller harmless
from any claim related to the item of the equipment
purchased. Under no circumstances will the seller be
liable for any damages or expenses by reason of use or
sale of any such equipment.
The Seller assumes no liability
regarding the improper installation or misapplication of
its products. It is the installer's responsibility to
check for proper installation and in doubt contact the
manufacturer. The buyer is solely responsible for
all warranty issues from the manufacturer.
LIMITATION OF WARRANTY
MADS Electronics ( Hereafter Seller )
gives Limited Warranty as to description, quality,
merchantability, and fitness for any particular purpose,
productiveness, or any other matter of the Seller’s
product sold herewith. The Seller shall be in no way
responsible for the products proper use and service and
the buyer hereby waives all rights other than those
expressly written herein. This warranty shall not be
extended, altered or varied except to be a written
instrument signed by Seller and Buyer.
The warranty is limited to one ( 1 )
year from the date of sale and limited solely to the
parts contained within the products kit. All products
that are in question of warranty must be returned
prepaid to the Seller and must be accompanied by a dated
proof of purchase receipt. All Warranty claims are
subject to approval by MADS Electronics.
Under no circumstances will the Seller
be liable for any labour charged or travel time incurred
by in diagnosis for defects, removal, or reinstallation
of this product or any other contingent expenses.
Under no circumstances will the Seller
be liable for any damage or expenses incurred by reason
of the use or sale of any such equipment.
In the event that the buyer does not
agree with this agreement: THE BUYER MAY PROMPTLY RETURN
THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A
DATED PROOF OF PURCHASE TO THE PLACE OF PURCHASE WITHIN
TEN (10) DAYS FROM THE DATE OF PURCHASE FOR A FULL
REFUND.
THE INSTALLATION OF THIS PRODUCT
INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS
THE TERMS AND CONDITIONS.
MADS Electronics Smarty Model S-06A for DODGE 24V Cummins
Turbodiesel
(2003 - 2006)
MADS ELECTRONICS MADS ELECTRONICS IN STOCK AND READY TO SHIP!
PRICE: S-06A for
2003 - 2006 Turbodiesel: $685.00
-
 Ten
different CaTCHER performance software modules for
each truck.
- Smarty leaves NO trace at all of
itself once the ECM is set back to stock.
- ABS / Speedo recalibration in
steps of one tenth of an inch.
- Code reader, codes are displayed
as Pxxxx and in plain English.
- Fastest download, up to three
times faster than the competition.
- Built-in USB port for Internet
updates.
Horsepower Settings
-
SW# 0: Half power
-
SW# 1: 30 Hp
increase, with added timing
-
SW# 2: 60 Hp
increase, no added timing
-
SW# 3: 60 Hp
increase, with added timing
-
SW# 4: 90 Hp
increase, no added timing
-
SW# 5: 90 Hp
increase, with added timing
-
SW# 6: 130 Hp
increase, no added timing
-
SW# 7: 130 Hp
increase, with added timing
-
SW# 8: 170 Hp
increase, no added timing***
-
SW# 9: 170 Hp
increase, with added timing***
MORE INFORMATION ABOUT MADS Electronics Smarty Model S-06A for DODGE 24V Cummins
Turbodiesel
(2003 - 2006)
MADS Electronics Smarty Model S-06A1 for DODGE 24V Cummins
Turbodiesel (2003 - 2007)
MADS ELECTRONICS IN STOCK AND READY TO SHIP!
PRICE: S-06A1 for
2003 - 2007 5.9L CR Cummins Turbodiesel: $685.00
-
Ten
different CaTCHER performance software modules for
each truck.
- Smarty leaves NO trace at all of
itself once the ECM is set back to stock.
- ABS / Speedo recalibration in
steps of one tenth of an inch.
- Code reader, codes are displayed
as Pxxxx and in plain English.
- Fastest download, up to three
times faster than the competition.
- Built-in USB port for Internet
updates.
Horsepower Settings
-
SW# 0: Half power
-
SW# 1: 30 Hp
increase, with added timing
-
SW# 2: 60 Hp
increase, no added timing
-
SW# 3: 60 Hp
increase, with added timing
-
SW# 4: 90 Hp
increase, no added timing
-
SW# 5: 90 Hp
increase, with added timing
-
SW# 6: 130 Hp
increase, no added timing
-
SW# 7: 130 Hp
increase, with added timing
-
SW# 8: 170 Hp
increase, no added timing***
-
SW# 9: 170 Hp
increase, with added timing***
MORE INFORMATION ABOUT MADS Electronics Smarty Model S-06A1 for DODGE 24V Cummins
Turbodiesel (2003 - 2007)
MADS Electronics Smarty Model S-03A for Dodge
24V
Cummins Turbodiesel (98.5 - 02)
SMARTY MODULE MADS ELECTRONICS IN STOCK AND READY TO SHIP!
PRICE: S-03A for the
98.5 - 02 Cummins Turbodiesel: $649.00
Special Features
- CaTCHER software modules.
- Ten different performance levels.
- Fastest download in the industry, a typical ECM
update takes just two minutes.
- ABS tire height updates in just seconds.
- Not traceable by the dealer in the stock setting.
Smarty leaves no footprint.
- Cold weather 3 Cylinder High Idle is enabled in all software.
- Reads Diagnostic Trouble Codes in plain text.
- No tools required, no fuses to pull.
- USB built in for simple updates .
- Most complete keyboard in the industry.
- Reliable, it works off your OEM ECM hardware.
Software Settings
- SW# 0: Half power
- SW# 1: Fuel Saver
- SW# 2: Only more fuel and Boost
- SW# 3: Like # 2 + added timing
- SW# 4: Soft CaTCHER no added
timing
- SW# 5: Like # 4 + added Timing
- SW# 6: Mild CaTCHER no added
timing
- SW# 7: Like # 6 + added Timing
- SW# 8: CaTCHER no added timing
- SW# 9: CaTCHER with Timing
MORE INFORMATION ABOUT MADS Electronics Smarty Model S-03A for Dodge
24V
Cummins Turbodiesel (98.5 - 02)
|
